基于WebGL的3D立库可视化系统设计与实现

针对当前扩大化和普及化的仓储物流,提出了一种3D自动化立体仓库可视化系统的实现方案,用以解决仓储系统中遇到的数据不直观的问题。该系统采用JavaScript编程语言,以Three.js引擎为基础,构建了基于WebGL的三维自动化立体仓库的可视化系统,该系统能有效直观的进行仓储管理,适合现代化仓储企业的管理需求。     

Progressive failure analysis of notched composite plate by utilizing macro mechanics approach

In this study, gradual and sudden reduction methods were combined to simulate a progressive failure in notched composite plates using a macro mechanics approach. Using the presented method, a progressive failure is simulated based on a linear softening law prior to a catastrophic failure, and thereafter, sudden reduction methods are employed for modeling a progressive failure. This combination method significantly reduces the computational cost and is also capable of simultaneously predicting the first and last ply failures (LPFs) in composite plates. The proposed method is intended to predict the first ply failure (FPF), LPF, and dominant failure modes of carbon/epoxy and glass/epoxy notched composite plates. In addition, the effects of mechanical properties and different stacking sequences on the propagation of damage in notched composite plates were studied. The results of the presented method were compared with experimental data previously reported in the literature. By comparing the numerical and experimental data, it is revealed that the proposed method can accurately simulate the failure propagation in notched composite plates at a low computational cost.     

基于工程状态标定的诊断载荷试验识别方法及应用

针对在役公路梁式桥梁由于材料性能退化及外部环境等因素共同作用而导致承载力不足、耐久性降低等问题,开展旧桥力学性能的快速诊断试验研究。通过诊断性载荷试验的理论分析和有限元模型标定流程研究,快速、高效地完成在役公路桥梁的承载力性能测量和评估,从而为在役公路桥梁结构的养护管理提供可靠的技术支持。     

LBM investigation of a Cu-water nanofluid over various configurations of pipes in the mixed convection flow

Increasing the heat capacity of heat exchangers is a crucial need for modern devices. The thermal conductivity of the usual fluids and the Nusselt (Nu) number of flows containing such fluids are two bottlenecks in the way of increasing heat delivery in the heat exchangers. For this reason, nanofluids have been introduced. The effect of utilizing a Cu-water nanofluid as a coolant of two hot pipes in a square cavity is investigated numerically with a two-component lattice Boltzmann method. The volume fraction of nanoparticles is assumed to be constant (0.03) while the Richardson (Ri) number varies from 0.02 to 20. Results show that the effectiveness of nanoparticles is better observed in the natural convection mode. However, sedimentation is also very probable at high Ri numbers, which significantly reduces the effectiveness of the nanoparticles. Configurations which produce a natural convection stream similar to the forced convection one as well as the configurations with high spacing and hence, low heat stream interactions, are the best choices for a uniform heat rate from the pipes.     

Stress wave propagation in adhesively bonded functionally graded cylinders: an improved model

This study presents an improved mathematical model to analyse the stress wave propagation in adhesively bonded functionally graded (FG) circular cylinders (butt joint) under an axial impulsive load. The volume fractions of the material constituents in the upper and lower cylinders were functionally tailored through the thickness of each cylinder using a power-law. The effective material properties of both cylinders, which are made of aluminum (Al) and silicon carbide (SiC), at any point were predicted by using the Mori–Tanaka homogenization scheme. In this improved model, the governing equations of the wave propagation include the spatial derivatives of local mechanical properties and were discretized by means of the finite difference method. The influence of these spatial derivatives and the compositional gradient exponent on the displacement and stress distributions of the joint was investigated. The material composition variations of both cylinders affected the displacement and stress fields whereas the compositional gradient exponent had a minor effect. The stress concentrations were alleviated in time, the displacement and stress distributions/variations around/along the upper and lower cylinder-adhesive interfaces were significantly affected by the adhesive layer. The spatial derivatives also affected the temporal histories of the displacement and stress components evaluated at the selected critical points of the upper cylinder, adhesive layer and lower cylinder. The consideration of the spatial local material derivatives provided a more accurate mathematical model of wave propagations through the graded layered structures.     

环境中污染源废气检测方法及影响因素分析

对污染源废气监测原理进行了简单分析,阐述了当前我国常用的环境中污染源废气检测方法,并对废气检测影响因素及质量控制进行了深入探究。     

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

Through a combined computational fluid dynamics and discrete element method approach, the effect of the operating parameters on the hydrodynamics and heat‐transfer properties of gas‐solid two‐phase flows in a spouted bed are extensively investigated. Considering the high velocity in the fountain region, gas turbulence is resolved by employing the large‐eddy simulation. The rolling friction model is adopted for more precise predictions of solid behavior near the wall. Subsequently, the gas‐solid flow patterns, gas‐solid velocities, and temperature evolution are investigated. Moreover, different operating conditions and geometry configurations are evaluated with respect to heat‐transfer performance. The results provide a fundamental understanding of heat‐transfer mechanisms in spouted beds.     

Reduced‐order method for mathematical modeling of multiphase dc‐dc converter

A multiphase dc‐dc converter is effective for miniaturization and achieving high‐power density in a switching power supply. However, its mathematical modeling becomes complex as the phase number of the circuit increases. This study proposes a new modeling method to derive a reduced‐order method in a simple manner. The frequency characteristics of the reduced‐order model are fit to those of the original mathematical model of the multiphase dc‐dc converter. Therefore, the efficacy of the proposed method is validated.     

Soybean Trypsin Inhibitor Assay: Further Improvement of the Standard Method Approved and Reapproved by American Oil Chemists’ Society and American Association of Cereal Chemists International

For measuring trypsin inhibitor (TI) activities in soybean products, the current standard method, approved and reapproved by American Oil Chemists Society (Method Ba 12-75) and American Association of Cereal Chemists International (Method 22-40.01), features mixing trypsin with a series of inhibitor levels and then adding a substrate to start the colorimetric reaction. Yet, previous studies have shown flaws with the method, particularly with using several inhibitor levels and the sequence of adding the substrate last. The present study showed that with varying levels of dilution and volumes of a dilute sample extract, the pH of the premix (the mixture of a dilute sample extract and trypsin solution) ranged 3.30–3.60 for raw soy flour, and 3.20–6.70 for toasted soy. Within these premix pH ranges, the standard method of adding substrate last would give TI values equal to or less than those measured by the same method except for adding the enzyme last. The standard method was subsequently improved by using a single sample extract level and the enzyme-last sequence. Other modifications included making stock solutions for reagents, adding Ca²⁺ to the trypsin solution, diluting sample extracts to a level that causes 30–70% of inhibition, and running both reference and sample blanks for better controls. Alternatively, the full volume assay (10 mL total, as in the standard method) was further modified by using half the volume of each reagent with the same concentration. Compared to the standard method, the improved methods gave more consistent results when assaying 11 selected soy products. The half volume (5 mL) and full volume methods gave the same results, but the former could increase assay sensitivity and reduce amounts of reagents used.     

基于心理图式的知识挖掘与创新设计——以国庆彩车设计为例

为了提高设计创新效率,本研究基于心理图式提出了国庆彩车的设计程序与方法。研究按照浅层、中层和深层的次序递进,设计心理图式划分为“造型图式”“叙事与动作图式”以及“人物和情感图式”的基本类别,并提出了综合性、时态性、差异性和集体性四类基本属性。而后结合新中国成立70周年彩车设计,对不同心理图式的应用方法和属性进行了案例分析。本文所提出的方法在设计实践中得到了实证,具有一定的实用价值。